New generation
heating systems
Address: 4, Vaclav Havel Blvd
(4, Ivana Lepse Blvd)
03067, Kyiv, Ukraine,
Phones: (096) 457 39-39
(099) 457 39-39
(073) 457 39-39

Types of application for SOLMA systems

Equipment SАS

Solma Apartment Studio

The SOLMA system together with the circulation pump and the expansion tank are located in an enclosed IP43 housing, which allows it to be installed in an apartment in any convenient place (kitchen, corridor, toilet, etc.).
Simplified version for installation in apartment buildings. Additionally, a security group and cold water make-up are installed.

Equipment SВS

SOLMA Box System

The SOLMA system with a complete set (circulating pump, expansion tank, safety group, coarse filter) is installed in a closet that allows it to be installed in corridors or other common areas of apartment buildings.
Easy to install and operate. The presence of an additional function of Wi-Fi or a radio channel allows you to monitor and regulate the temperature in the room. For a fee, the system can be equipped with motion sensors to protect against hacking.

Equipment SCS

SOLMA Compact System

The smallest system that is used for heating small rooms.
It can be installed with additional equipment in any convenient place for the consumer.

Equipment SES

SOLMA Energy Storage

The most profitable heating system, always more economical than gas, pyrolysis and, especially, centralized heating.
The system consists of a SOLMA heater (options SCS, SSS, SMS) and a storage tank of SOLMA or other manufacturers.
Additional equipment (circulation pump, expansion tank, safety group, filters) are purchased after determining the amount of heat that needs to be accumulated at night. It can be controlled via radio or Wi-Fi.
Applicable for office buildings, kindergartens, schools, barracks, residential premises. Can be performed by STS.

Equipment SНS

SOLMA Heat Exchange System

The system consists of a SOLMA heater (options SCS, SSS, SMS) and a heat exchanger of the required power.
This version of the system is used under relatively unfavorable operating conditions, such as old wiring, unclean dirty coolant. It allows you to protect the heating system from failure and to take the necessary measures to troubleshoot without affecting the heater itself.

Equipment SIS

SOLMA Industrial System

The SOLMA system in industrial design consists of modules (50 kW), which are connected in series to achieve the required installed capacity, as well as a separate control cabinet.
Additional equipment (circulation pump, expansion tank, etc.) are determined on the basis of the technical characteristics of the building.
Thanks to the radio or Wi-Fi control, the customer has the right to determine and establish the most favorable heating mode for the building depending on the work schedule, weekends, night preferential tariff, etc. This allows you to use 0.25% of the total tariff and save costs compared with centralized heating at least 2 times.

Equipment SJS

SOLMA Joint System

The SOLMA system is installed in parallel with a gas or solid fuel boiler, which makes it possible to regulate the shutdown of the latter according to the return temperature when the SOLMA system is turned on at the night rate.
For example, during the day the heating system operates at a gas tariff of 8.55 UAH/m3, and at night on preferential electric 0.45 UAH/kW.
Also, it will allow to use all 3000 kW of preferential, for houses with an area of over 200m2 .

Equipment SMS

SOLMA Multimodular System

A multi-module system is needed to set the required power, as well as control the power depending on heat loss (outside temperature), night tariff, etc.
Also, this system allows the use of modularity, so that one of the modules will work from a diesel generator and maintain heat in the house until the power supply is restored.
The system is applicable for country houses with intermittently problematic power supply or prolonged absence of user space.

Equipment SPS

Solma Pool System

The system is designed for heating and filtering water in the pool.
Installed in the pool pit, and the control panel (pump, heating) separately in a convenient place for the user.
May be in SIS version for large pools. Options SSS, SMS - for private pools.
Due to the low temperature (up to 40°C) supply of coolant (water), as well as the absence of the need to maintain the heater, the system in the SPS version has a lifetime of more than 50 years and a guarantee of 10 years.

Equipment SSS

Solma Split System

A separate version of the SOLMA System includes a heater and a control panel, which is installed at the request of the customer in a convenient place.
Additionally, for a fee, a circulation pump, a surge tank, a safety group, filters, etc. are connected to the system.
The system is applicable in residential buildings and rooms up to 200 m2 .

Equipment STS

Solma Two-circuit System

The system is designed to reduce the installed capacity of the object of operation, allows you to solve two problems of heating and hot water from a single heater (hot water is in priority).
With additional equipment (circulating pump, expansion tank, safety group, indirect heating boiler, etc.) can be performed by var. SES, SJS, SMS.
Applicable in homes, apartments, offices, etc.

Choose the optimal system

Room area

Insulation class

Equipment SАS

Solma Apartment Studio

Equipment SBS

SOLMA BOX System

Equipment SCS

SOLMA Compact System

Equipment SSS

Solma Split System

Room area

Insulation class

Equipment SMS

SOLMA Multimodular System

Water volume

Insulation class

Equipment SPS

Solma Pool System

Room area

Insulation class

Equipment SIS

SOLMA Industrial System